APlusLift · HW-8S / HW-8SXLT · Four-post parking / storage lift
0312-10055
U.S. sale status: Shopify currently classifies this product as “Not suitable for U.S. sale” and the existing sale hold must remain in force until the compatibility record is cleared.
Electrical source data: The product record lists 110V single-phase power, a 1.5 HP / 10A motor and a manufacturer-recommended 20A breaker. Frequency and plug/connector remain unverified in the Shopify compatibility record.
Site: The manufacturer currently lists a 4 in. concrete thickness reference. Confirm slab condition, anchoring, garage clearance and local requirements against the current manual before installation.
Receiving: Both variants are configured as “FORKLIFT ONSITE OR TERMINAL PICKUP.” Confirm current freight cost, destination access, unloading equipment and shipment timing with DJM Direct Service before dispatch.
The HW-8S and HW-8SXLT are four-post parking, storage and service lifts with the same rated capacity and power-unit specification. The XLT configuration adds length, width, lifting height and under-runway clearance for buyers who need the larger envelope.
These are the actual images attached to this Shopify product. Each frame uses contain-fit presentation so the equipment remains fully visible.
Both models are rated for 8,000 lb. Use the dimensional differences below to decide which physical envelope better suits the intended vehicle and garage.
The source product data is specific, but Shopify currently keeps this product on a U.S. launch sales hold. That status is not overridden by the technical references shown below.
The source record lists 110V, single-phase power, a 1.5 HP / 10A motor and a 20A breaker recommendation. Shopify still records frequency as “Not specified in source product record — confirm before purchase.” and connector as “Not specified in source product record — confirm before purchase.”. The sale hold remains in force until the store’s compatibility record is cleared.
Contact equipment supportChoose the standard or XLT footprint using the verified dimensions above. The manufacturer currently lists a 4 in. concrete thickness reference; slab condition, anchoring, ceiling clearance and local requirements must still be checked against the current manual and installation conditions.
Request a planning callBoth Shopify variants specify forklift on-site or terminal pickup. Confirm destination access, unloading equipment, current freight cost and current shipment timing with DJM Direct Service before dispatch. No fixed delivery estimate or free-shipping promise is made here.
Check receiving details8,000 lb four-post parking, storage and service lift offered in standard HW-8S and extended HW-8SXLT configurations. Source specifications list a 110V single-phase 1.5HP hydraulic power unit, 10A motor load and 20A breaker recommendation. Professional installation and site/electrical verification are required.
Temporary launch sales hold — U.S. electrical configuration, frequency, connector and installation requirements must be verified before this lift is cleared for sale.
Professional installation required. Confirm slab/concrete requirements, electrical supply, clearances, anchoring and local code requirements before installation.
Send the intended vehicle dimensions and weight, available garage length/width/height, slab information, electrical setup and freight-unloading access. DJM Direct Service can check the fit and the current U.S. compatibility record before purchase is enabled.
