Parking architecture
Two decks, four runways
Two separate runway pairs support the double-deck parking/storage arrangement, with two 93 in. drive-through openings.
APlusLift · HW-9KDP · Double-Deck Parking Lift
APlusLift 9,000LB 4-Post Double Deck Parking Storage Car Lift – HW-9KDP
$3,275.00
0312-10077
Capacity9,000 lb
Footprint230 × 210 × 96 in.
Lift height82 in.
Power110V · 1.5HP
Warranty3 years / 36 months
Typical dispatch2–4 business days
ReceivingForklift or terminal pickup
Freight delivery & site preparation
Current manufacturer lead time: APlusLift typically states 2–4 business days to ship when available.
Lower-48 freight: Current APlusLift terms include free car-lift freight when a forklift or similar unloading equipment is on-site, or free pickup at a nearby freight terminal. Car lifts are not unloaded with liftgate service. Remote, limited-access and high-cost areas may incur extra charges.
Before ordering: Verify the 230 in. overall length with ramps, 210 in. overall width, 96 in. overall height, vehicle stack, 4 in. / 3000 PSI concrete specification, electrical circuit and unloading plan against the current installation manual and local requirements.
APlusLift HW-9KDP · Double-deck 4-post
Turn one parking zone into a two-deck storage system.
The HW-9KDP is a 9,000 lb four-post double-deck lift built for parking, vehicle storage and service where vertical capacity matters more than adding another bay.
Configuration2 decks · 4 runways
Warranty3 years / 36 months
Power110V single phase
Typical dispatch2–4 business days
Rated capacity9,000 lbParking · storage · service
Overall width210 in.190 in. between posts
Lifting height82 in.74 in. runway clearance
Electrical110V · 1.5HP10A motor · 20A breaker recommended
Double-deck architecture
A wide four-runway platform engineered around parking density.
Two decks and four runways create two drive-through positions within one lift structure. The 210 in. overall width is a major planning dimension—measure the bay before treating this like a conventional single-deck four-post lift.
HW-9KDP product imagery from the current Shopify media set.Always confirm the latest manufacturer installation manual before site preparation.
Footprint & clearance planning
Measure the complete system—not just the runway.
The double-deck layout needs substantially more lateral room than a standard storage lift. Confirm the full footprint, approach space, ceiling height and both vehicle envelopes before ordering.
Site-fit checkpoint: overall lift width is 210 in. Verify wall clearance, door opening, vehicle mirror width, pedestrian access and any local code clearances in addition to the lift dimensions.
01Overall length230 in. with ramps
02Lift body length194 in. without ramps
03Overall width210 in.
04Overall height96 in.
05Width between posts190 in.
06Drive-through openings93 in. × 2
07Lifting height82 in.
08Clearance under runway74 in.
09Each runway184 × 19 in.
10Approach ramps36 × 19 in.
Included equipment
The storage package includes the hardware buyers usually add later.
APlusLift currently specifies two decks, four runways and a bundle of parking/storage accessories with the HW-9KDP.
Storage protection
Six drip trays included
Six drip trays are included for parked-vehicle storage, alongside two jack trays for service and accessory positioning.
Mobility & access
Caster kit + four ramps
The current package lists a caster kit, four removable approach ramps and a power cord. Use only as permitted by the current manual and setup instructions.
1Caster kit
2Jack trays
6Drip trays
4Removable ramps
1Power cord
Installation readiness
Four checks before freight leaves the warehouse.
Heavy lifting equipment should be ordered only after the site, electrical service, slab and receiving plan have been checked against the current manufacturer documentation.
Concrete
APlusLift currently specifies a minimum 4 in. slab at 3000 PSI. Verify slab condition, reinforcement, joints, anchors and local requirements with the current installation manual and qualified installer.
Electrical
110V single phase, 1.5HP motor, 10A motor load and a 20A breaker recommendation. Final wiring and circuit suitability should be confirmed by a qualified electrician.
Hydraulic oil
Prepare 3–5 gallons of AW32 or AW46 hydraulic oil. APlusLift states that hydraulic oil is not included in the package.
Vehicle stack
Check upper and lower vehicle height, wheelbase, weight distribution and ceiling clearance at full rise before committing the bay.
Lower-48 freight terms
APlusLift currently offers free shipping for car lifts to the lower 48 states when suitable unloading equipment is on-site, or free pickup at a nearby freight terminal.
- On-site forklift or similar unloading equipment is required for car-lift delivery.
- Liftgate unloading is not offered for 2-post and 4-post car lifts.
- Remote, limited-access and high-cost areas can incur additional charges.
Receiving footprint
Shipping weight is approximately 2,850 lb and the current package size is 210 × 22 × 36 in. Plan truck access, unloading equipment and a safe staging area before scheduling delivery.
- Typical manufacturer dispatch: 2–4 business days when available.
- Tracking is supplied after shipment.
- Inspect freight at delivery and document visible damage before accepting.
Technical reference
HW-9KDP specifications.
View complete specifications
ModelHW-9KDP
Rated capacity9,000 lb
UsageParking / storage / service
Configuration4-post · 2 decks · 4 runways
Overall length230 in. with ramps / 194 in. without
Overall width210 in.
Overall height96 in.
Lifting height82 in.
Runway clearance74 in.
Between posts190 in.
Drive-through93 in. × 2
Runway size184 × 19 in.
Runway spacing37 3/8 – 19 11/16 – 37 3/8 in.
Ramp size36 × 19 in.
Rise time50 sec
Motor110V · 1-phase · 1.5HP · 10A
Breaker20A recommended
Hydraulic oil3–5 gal AW32/AW46 · not included
Concrete4 in. minimum · 3000 PSI
Shipping weight2,850 lb
Package size210 × 22 × 36 in.
Warranty3 years / 36 months
FinishPowder coated
Certification claimCE-certified structure & hydraulic system
Before ordering
Questions buyers should resolve first.
Is the HW-9KDP really 210 inches wide?
Yes. APlusLift's current specification lists 210 in. overall width and 190 in. between posts. This is a double-deck/four-runway system, so the lateral footprint is much wider than a conventional single-deck four-post lift.
What ceiling height do I need?
The lift itself is listed at 96 in. overall height, but usable ceiling height depends on the lower vehicle, upper vehicle, lifting position and required safe clearance. Measure the full vehicle stack and verify the current manual before installation.
What electrical service is required?
The current product specification lists 110V single-phase power, a 1.5HP / 10A motor and a 20A breaker recommendation. Have a qualified electrician confirm the circuit and local code requirements.
Is freight included?
Under APlusLift's current terms, lower-48 car-lift freight is free when a forklift or similar unloading equipment is on-site, or via nearby terminal pickup. Remote, limited-access and high-cost destinations may require additional charges. Car lifts are not unloaded by liftgate.
How quickly does it ship?
APlusLift currently states a typical 2–4 business-day dispatch window. Stock status, warehouse conditions and destination can change timing, so availability should be confirmed for time-sensitive installations.
What comes with the lift?
The current package lists a caster kit, two jack trays, six drip trays, four removable approach ramps and a power cord in addition to the two-deck/four-runway lift structure.
Need a fit check before ordering? Send your bay width, ceiling height, door opening and the vehicles you plan to store.
Info@djmdirectservice.com