Electrical220VDedicated 220V / 20A circuit recommended by manufacturer.
U.S. statusConfirmed U.S. compatibleCompatibility control from Shopify
APlusLift 14,000LB 2-Post Overhead Single Release Direct Drive Car Lift with 3 Year Warranty – AP-14SR
Delivery Option:
FORKLIFT ONSITE OR TERMINAL PICKUP
Request a CallDiscuss bay fit, 220V service, slab preparation and freight receiving before ordering.
CompatibilityConfirmed U.S. compatible
ReceivingForklift onsite or terminal pickup
AvailabilityCurrently unavailable
Installation & receiving checklist
Electrical: Shopify records this AP-14SR as a U.S.-market 220V single-phase configuration with a 3 HP motor and a manufacturer-recommended dedicated 20A circuit. Use a licensed electrician.
Site: Current verified manufacturer data lists a 165 11/32 in. overall height, 142 1/8 in. overall width and 6 in. thick, 3500 psi reinforced concrete. Confirm slab condition, anchoring, overhead clearance and local code against the current AP-14SR manual before installation.
Receiving: The current Shopify delivery option is “FORKLIFT ONSITE OR TERMINAL PICKUP.” Confirm destination access, unloading equipment, freight cost and current ship timing with DJM Direct Service before dispatch.
APlusLift · AP-14SR
14,000 lb service capacity, planned around the bay.
The AP-14SR product record describes an overhead two-post lift with dual-cylinder direct-drive hydraulics, single-point safety-lock release and symmetrical two-stage arms. Electrical service, slab condition, clearances and freight receiving should be planned before installation.
ModelAP-14SRShopify product record
CategoryCar LiftsOverhead two-post vehicle lift
Rated capacity14,000 lbConfirmed in the listing and manufacturer data
U.S. electrical statusConfirmed U.S. compatibleControlled by the Shopify compatibility record
Product imagery
Inspect the AP-14SR from multiple views.
Every image below comes from the media attached to this exact Shopify product. Equipment is shown with contain-fit presentation so the lift remains fully visible.
Lift · arms loweredLift · arms openSide profileHydraulic power unit
Buyer planning
Confirm the bay, power and receiving plan first.
The AP-14SR is permanently installed workshop equipment. The three decisions below are specific to this product record and the currently verified manufacturer data.
Current U.S. statusConfirmed U.S. compatible
01
Electrical supply
The Shopify record confirms 220V, a 3 HP single-phase motor and Dedicated 220V / 20A circuit recommended by manufacturer. A licensed electrician is required for the electrical connection.
Verified manufacturer dimensions list 165 11/32 in. overall height and 142 1/8 in. overall width. The current manufacturer specification calls for 6 in. thick, 3500 psi reinforced concrete. Confirm slab condition, anchors, overhead clearance and local code against the current AP-14SR manual before installation.
The current Shopify variant is “FORKLIFT ONSITE OR TERMINAL PICKUP”. Confirm destination access, unloading equipment, freight cost and current ship timing with DJM Direct Service before dispatch. No fixed delivery estimate is stated on this page.
Professional 14,000 lb two-post overhead vehicle lift with single-point safety-lock release and dual-cylinder direct-drive hydraulic operation. Manufacturer specifications list a 220V single-phase 3 HP motor with a recommended dedicated 20A circuit, symmetrical two-stage arms, two sets of truck adapters, a 75-second full-rise time and a 3-year parts warranty. Professional installation, suitable reinforced concrete, electrical preparation and freight-unloading access are required.
Drive systemDual hydraulic cylinders · direct drive
Safety releaseSingle point
Overall height165 11/32 in.
Overall width142 1/8 in.
Drive-through width104 1/8 in.
Maximum lift height79 19/32 in. with truck adapters
Arm reach32 5/32–49 7/32 in. · front and rear
Electrical220V · single phase · 3 HP · 20A circuit recommended
Full rise75 seconds
Concrete6 in. · 3500 psi · reinforced
Shipping weightApprox. 2,300 lb
Shipping package150 × 33 × 21 in.
Truck adapters4 × 2 3/4 in. + 4 × 5 1/2 in.
Parts warranty3 years / 36 months · manufacturer terms apply
U.S. installation record
U.S.-market product sold by APlusLift for delivery in the lower 48 states. Manufacturer specifies a 220V single-phase 3 HP motor and recommends a dedicated 20A breaker. A licensed electrician is required for the 220V electrical connection.
Professional installation required. Manufacturer specifies a dedicated 220V/20A electrical circuit. Confirm current concrete, anchoring, overhead-clearance and local-code requirements against the AP-14SR installation manual before installation.
Buyer assistance
Need help confirming whether the AP-14SR fits your workshop?
Send the intended vehicle types and weights, available bay height and width, slab information, 220V electrical setup and freight-unloading access. DJM Direct Service can review those details against the current product record before you proceed.
